Invalid Combination

Invalid combination

Checking the component
The diagnostic trouble code (DTC) is stored if the control module has detected an invalid button combination in the controls for entering.
Check if the switch is sticking due to dirt or there is an obstruction preventing the switch from returning.
No further corrective action is required if the diagnostic trouble code (DTC) is intermittent and does not recur.
The keypad must be replaced if the switch does not spring back and the fault is not due to dirt or an external object.

Hint: Read off the relevant switch and check the function.

Other information:
- Rear seat backrest Rear Seat Backrest









Continue - Verification

-------------------------------------------------

Verification









Hint: After carrying out the repair check that the symptom has been remedied.

- Ignition off.
- Reinstall the connectors, components etc.
- Ignition on.
- Read off the relevant button or switch.
Check that the function for the relevant button or switch is correct.





Is the function OK?

Yes - FAULT FOUND

No - Fault-tracing information

-------------------------------------------------

Fault-tracing information

FAULT-TRACING FAILED - DONE

Attempt New Test - Checking the component

-------------------------------------------------