Activated Too Long

Activated too long

Replacing a component
A condition of the fault tracing is that the Diagnostic Trouble Code (DTC) is not generated because the control button has been held in for too long.
If the malfunction is intermittent, it means that the malfunction has been registered at an earlier time but the malfunction no longer remains. Intermittent faults can occur for a number of different reasons. The fault is evaluated depending on how it occurs.
Check if the switch is sticking due to dirt or there is an obstruction preventing the switch from returning.
The keypad must be replaced if the switch does not spring back and the fault is not due to dirt or an external object.

Hint: Read off the relevant switch and check the function. Click the VCT2000 symbol to read off the value.

Remedy as necessary.

Other information:
- Control module front seat Service and Repair









Continue - Verification

-------------------------------------------------

Verification

Hint: After carrying out the repair check that the symptom has been remedied.








- Ignition off.
- Reinstall the connectors, components etc.
- Ignition on.
Check that seat operation functions. Move the seat manually in all directions.

Hint: Read off the relevant switch and check the function. Click the VCT2000 symbol to read off the value.





Can the seat be operated?

Yes - FAULT FOUND

No - Fault-tracing information

-------------------------------------------------

Fault-tracing information

FAULT-TRACING FAILED - DONE

Attempt New Test - Replacing a component

-------------------------------------------------