Signal Missing

Signal missing

Checking the component
If the malfunction is intermittent, it means that the malfunction has been registered at an earlier time but the malfunction no longer remains. Intermittent faults can occur for a number of different reasons. The fault is evaluated depending on how it occurs.
Check the fuse for the power seat module, right (PSR).
Check the signal cable between control module terminal #A3 and seat motor 4. Check for an open-circuit. Check for contact resistance.
Replace the signal cable if a fault is found.
Try replacing the motor if no fault is found.
Remedy as necessary.

Other information:
- Electric motor front seat cushion Electric Motor Front Seat Cushion
- Checking wiring and terminals Checking Wiring and Terminals
- Signal specification Signal Specification, Power Seat Module Right (PSR)
- For information about fuses, see the wiring diagram.





Continue - Verification

-------------------------------------------------

Verification









Hint: After carrying out the repair check that the symptom has been remedied.

- Ignition off.
- Reinstall the connectors, components etc.
- Ignition on.
Check that seat operation functions. Move the seat manually in all directions.

Can the seat be operated?

Yes - FAULT FOUND

No - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
The fault should have been detected and remedied. As this is not the case fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.

Do you want to exit fault-tracing?

Yes - Exit fault-tracing

No - Attempt New Test

------------------------

FAULT-TRACING FAILED - DONE

Attempt New Test - Checking the component

-------------------------------------------------