Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information PSR-0036

Condition
Motor 4 controls the height of the front edge of the seat.
Motor 4 must be activated before the diagnostic trouble code (DTC) can be detected.
The diagnostic trouble code (DTC) is stored if motor 4 does not run despite the control for M4+ being activated and the power seat module, right (PSR) registering +12 V on the M4+ signal cable.





Substitute value
None.

Possible source
Open-circuit in signal cable M4+.
Blown fuse.

Fault symptom[s]
Height adjustment of seat does not operate