Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information PSR-0032

Condition
Motor 2 controls the backrest rake.
Motor 2 must be activated before the diagnostic trouble code (DTC) can be detected.
The diagnostic trouble code (DTC) is stored if motor 2 does not run despite the control for M2+ being activated and the power seat module, right (PSR) registering +12 V on the M2+ signal cable.





Substitute value
None.

Possible source
Open-circuit in signal cable M2+.
Blown fuse.

Fault symptom[s]
Backrest adjustment does not operate