Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information PSR-0003

Condition
Motor 3 controls the height of the rear edge of the seat. Motor 3 must be activated before the diagnostic trouble code (DTC) can be detected.
If no hall sensor pulse is detected when the engine is running, the diagnostic trouble code is generated.





Substitute value
None.

Possible source
- Damaged hall sensor in engine 3.
- Short-circuit to ground or supply voltage in the signal cable.
- Open-circuit in the signal cable to the Hall sensor.

Fault symptom[s]
- Automatic adjustment of power seat/outer mirror does not work