Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information PSL-0034

Condition
Motor 3 controls the height of the rear edge of the seat.
Motor 3 must be activated before the diagnostic trouble code (DTC) can be detected.
The diagnostic trouble code (DTC) is stored if motor 3 does not run despite the control for M3+ being activated and the power seat module, left (PSL) registering +12 V on the M3+ signal cable.





Substitute value
None.

Possible source
Open-circuit in signal cable M3+.
Blown fuse.

Fault symptom[s]
Height adjustment of seat does not operate