Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information PAM-0003

Condition




Parking Assistance Module (PAM) checks the signal from parking sensor 1.
The diagnostic trouble code (DTC) is stored if the control module registers that the voltage in the signal cable is too low.
The diagnostic trouble code (DTC) can be diagnosed at ignition switch position II.

Substitute value
- None.

Possible source
- Short-circuit to ground in the signal cable or the connectors between the parking assistance module (PAM) and parking sensor 1
- Open-circuit in the signal cable or the connectors between the parking assistance module (PAM) and parking sensor 1.
- Open circuit in the power supply cable or in the connectors between the parking assistance module (PAM) and parking sensor 1.

Fault symptom[s]
- The information lamp is lit
- Message in the display.