Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information KVM-0115

Condition
When using the diagnostic tool to read out the remote receiver's part and serial number, the Keyless vehicle module (KVM) checks the reply from the Remote Receiver Module (RRX). If there is no reply from the Remote Keyless Entry (RKE) or it is incorrect, the Keyless vehicle module (KVM) interprets this as a fault and stores a DTC.

Note! DTCs can only be stored when the diagnostic tool is connected and readouts are taken.

The diagnostic trouble code (DTC) can be diagnosed when the ignition is switched on.

Substitute value
- None.

Possible source
- Internal fault in Remote Keyless Entry (RKE).

Fault symptom[s]
- None.