FREE REPAIR MANUALS & LABOR GUIDES 1982-2013 Vehicles
Courtesy of Operation CHARM: Car repair manuals for everyone.

Faulty Signal






Faulty signal

Checking the component
The infotainment module (ICM) has registered that the remote digital audio receiver (RDAR) is invalid according to the list stored in the central electronic module (CEM).
The cause of the fault is probably that no software has been downloaded or that software downloading has failed after Remote Digital Audio Receiver (RDAR) replacement.

Hint: When downloading software after replacing a control module, the serial number of the control module is stored in the central electronic module (CEM). This is so that the Security function on MOST can approve the control module in the MOST network in the car.

If the fault persists after software download, try replacing the Remote Digital Audio Receiver (RDAR).
Remedy as necessary.

Other information
- Satellite radio control module Satellite Radio Control Module





Continue - Verification

-------------------------------------------------

Verification




Verification

Hint: After carrying out the repair, check that the fault has been remedied.








- Ignition off
- Reinstall the connectors, components etc.
- Ignition on for at least 12 seconds.
Obtain the ID of the Remote Digital Audio Receiver (RDAR) by clicking on the VCT2000 symbol.





Can the control module ID be read off?

Yes - VERIFIED

No - VERIFICATION FAILED

------------------------

VERIFIED - FAULT FOUND

VERIFICATION FAILED - Fault-tracing information

-------------------------------------------------

Fault-tracing information

Attempt New Test - Checking the component

-------------------------------------------------