ICM-1A06

Diagnostic trouble code (DTC) information ICM-1A06

Condition

Note! This fault code can only be set in the factory.

The Infotainment control module (ICM) checks the status of the internal relay.
The diagnostic trouble code is stored if the infotainment relay does not deactivate ten minutes after the key has been removed from the lock and there is no traffic on the MOST network.





Substitute value
- None.

Possible source
- The infotainment control module (ICM) has not requested deactivation of the infotainment relay.

Fault symptom[s]
- Battery/Dead battery
- Battery/Weak or low electrical power