Signal Too High

Signal too high

Fault-tracing information
The diagnostic trouble code (DTC) may for example be stored when:
- Jump starting or boost charging the battery using high voltage
- Charge regulation is not functioning.
Check the above and remedy as necessary. Replace the electrical power steering module (EPS) if the diagnostic trouble code (DTC) subsequently recurs with a permanent status and no fault can be found (as above).

Other information
- Power steering module (PSC), B5254T7 Service and Repair

Location Of Components:

Continue - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
In case of this defect, troubleshooting is not followed by verification.
The information can be displayed again or the fault-tracing for this fault can be interrupted.

Do you want to view the information again?

Yes - Attempt New Test

No - FAULT FOUND

------------------------

Attempt New Test - Fault-tracing information

FAULT FOUND - DONE

-------------------------------------------------