Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information ECM-8410

Condition
Engine control module (ECM) checks the signal for engine speed at start. If the Engine control module (ECM) detects that the engine speed is lower than a certain value for a certain time, (depending on the temperature), the control module interprets this as a malfunction and the diagnostic trouble code is generated.
The diagnostic trouble code (DTC) can be diagnosed when starting the engine.

Substitute value
- None.

Possible source
- Blocked engine (the engine does not turn over)
- Signal interference.
- Damaged engine speed (RPM) sensor.

Fault symptom[s]
- Engine fails to start