Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information ECM-8210

Condition




The engine control module (ECM) checks the power supply from the system relay.
The diagnostic trouble code (DTC) is stored if the engine control module (ECM) detects that the power supply from the engine control module (ECM) to the throttle unit is lower than 8 V.
The diagnostic trouble code (DTC) can be diagnosed when the ignition is switched on.

Substitute value
- The injectors are shut off.

Possible source
- Faulty charging system
- Contact resistance in the terminals
- Damaged system relay.

Fault symptom[s]
- The starter motor turns but the engine does not start.