Signal Too High

Signal too high

Checking components and wiring
Check the power supply cable. Check for a short-circuit to supply voltage.
Take readings between:
- Engine Control Module (ECM) #B3 (#C3) and system relay.
Try a new system relay if no fault is found during the above fault-tracing.
Remedy as necessary.

Other information
- Connecting the breakout box, B5254T7 Connecting the Breakout Box, Engine Control Module (ECM)
- Signal specification, B5254T7 Signal Specification
- For further information about the fuses and relays, see the Wiring Diagram
- Checking wiring and terminals Checking Wiring and Terminals





Continue - Fault-tracing information

-------------------------------------------------

Fault-tracing information

Attempt New Test - Checking components and wiring

-------------------------------------------------