Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information ECM-7300

Condition




The engine control module (ECM) checks the signals for gear position sensor positions P and N.
The diagnostic trouble code (DTC) (Faulty signal) is stored if the engine control module (ECM) detects that the signal for P and N via CAN communication is missing or is incorrect.
The diagnostic trouble code (DTC) can be diagnosed when the ignition is switched on.

Substitute value
- None.

Possible source
- Faulty CAN communication.

Fault symptom[s]
- The starter motor does not turn.