Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information ECM-6110

Condition




The engine control module (ECM) checks that control of the intake camshaft is quick enough. This means that the intake camshaft (actual value) reaches the position requested by the engine control module (ECM) quickly enough. The diagnostic trouble code (DTC) is stored if the requested position is not reached within a certain time.
The diagnostic trouble code (DTC) can be diagnosed by the engine control module (ECM) when the engine is running and the camshaft control is active.

Substitute value
None.

Possible source
- Low oil pressure
- Poor oil quality
- Damaged reset valve
- Mechanical fault in the variable valve timing (VVT) unit.

Fault symptom[s]
- Malfunction indicator lamp (MIL) lit.