Fault-Tracing Information

Fault-tracing

Checking the wiring and sensors
- Ignition off.
Check the signal cable. Check for a short-circuit to ground. Check for a short-circuit to supply voltage.
Check connectors and connections for contact resistance or oxidation.
Remedy as necessary.

Other information
- Checking wiring and terminals Checking Wiring and Terminals

Continue - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
In case of this defect, troubleshooting is not followed by verification.
The information can be displayed again or the fault-tracing for this fault can be interrupted.

Do you want to view the information again?

Yes - Attempt New Test

No - FAULT FOUND

------------------------

Attempt New Test - Checking the wiring and sensors

-------------------------------------------------