Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information ECM-2A0C

Condition




The engine control module (ECM) checks the signal from the fuel temperature sensor. The fuel temperature sensor is integrated in the fuel pressure sensor. The diagnostic trouble code (DTC) is stored if the engine control module (ECM) registers that the signal from the fuel temperature sensor is too high.
The diagnostic trouble code (DTC) can be diagnosed at ignition on and with the engine running.
For information about fuel pressure regulation, see VIDA Design and Function.

Substitute value
- None.

Possible source
- Short-circuit to ground in the signal cable
- Damaged temperature sensor.

Fault symptom[s]
- None.