Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information ECM-2900

Condition




The engine control module (ECM) controls the fuel pressure via the fuel pump (FP) control module using a pulse width modulation (PWM) signal. The fuel pump (FP) control module then controls the fuel pump (FP) depending on the pressure requested by the engine control module (ECM). The diagnostic trouble code (DTC) is stored if the control capacity of the engine control module (ECM) for fuel pressure reaches the highest or lowest value and the desired fuel pressure (target value) is not achieved.
The diagnostic trouble code (DTC) can be diagnosed when the engine is idling.
For information about fuel pressure regulation, see VIDA Design and Function.

Substitute value
- None.

Possible source
- Leakage in the fuel lines
- Damaged fuel pressure sensor
- Damaged fuel pump
- Damaged fuel pump control module.

Fault symptom[s]
- Malfunction indicator lamp (MIL) lit
- Deterioration in performance
- The engine stops.