Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information ECM-2740

Condition




The engine control module (ECM) checks the signal for engine coolant temperature (ECT).
After the engine is started, the engine control module (ECM) calculates the theoretical engine coolant temperature (ECT) based on factors such as time since start, engine speed (RPM) and load. The diagnostic trouble code (DTC) is stored if the signal from the engine coolant temperature (ECT) sensor is static and does not correspond to the calculated temperature.
The diagnostic trouble code (DTC) is stored together with another diagnostic trouble code (DTC) for the engine coolant temperature (ECT) sensor.
The diagnostic trouble code (DTC) can be diagnosed when the engine is running.

Substitute value
None

Possible source
- Contact resistance and oxidation in the connectors
- Damaged temperature sensor.

Fault symptom[s]
- Malfunction indicator lamp (MIL) lit
- The engine is difficult to start.