Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information ECM-21CD

Condition
The engine control module (ECM) receives information from the heated oxygen sensor (HO2S) about the fuel / air mixture. If the fuel / air mixture deviates from lambda=1, the short-term fuel trim will compensate for this by adjusting the injection time so that lambda=1 is achieved. When the short-term fuel trim makes an adjustment, the integrator median must be adjusted by the long-term trim. The diagnostic trouble code (DTC) will be stored when the long-term trim must be adjusted almost to maximum in the idle range.
The diagnostic trouble code (DTC) can be diagnosed when idling.

Substitute value
None.

Possible source
- Leaking injectors
- Damaged mass air flow (MAF) sensor
- Contaminated engine oil
- Oil level too high
- Damaged heated oxygen sensor (HO2S).

Fault symptom[s]
- Malfunction indicator lamp (MIL) lit.