Internal Fault

Internal fault

Replacing the component
If the fault is intermittent, it has been registered previously but is no longer present. Intermittent faults can occur for a number of different reasons. The fault is evaluated depending on how it occurs.
If the fault is permanent, replace the control module.
Initialize the window position after replacing the control module. This is done via VIDA vehicle communication.
Remedy as necessary.

Other information:
- Driver door module (DDM) Driver Door Module (DDM)
- Passenger door module (PDM) Passenger Door Module (PDM).





Continue - Verification

-------------------------------------------------

Verification




Verification mixed

Verification

Hint: After carrying out the repair, check that the fault has been remedied.








- Ignition off
- Reinstall the connectors, components etc.
- Ignition on.
Check that the power window mechanism, door mirrors and central locking operate.

Do all the functions operate normally?

Yes - VERIFIED

No - VERIFICATION FAILED

------------------------

VERIFIED - FAULT FOUND

VERIFICATION FAILED - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
The fault should have been detected and remedied. As this is not the case fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.

Do you want to exit fault-tracing?

Yes - Exit fault-tracing

No - Attempt New Test

------------------------

Attempt New Test - Replacing the component

-------------------------------------------------