Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information DDM-003A

Condition
In vehicles equipped with BLIS-system, there is a camera mounted in each external rearview mirror. Driver door module (DDM) supplies voltage to the camera on the driver side of the vehicle.
The diagnostic trouble code (DTC) is stored if the Driver door module (DDM) registers too high a signal in the cable for powering the camera.

Substitute value
- None.

Possible source
- The voltage feed cable is short-circuited to voltage.

Fault symptom[s]
- LED does not light
- Message in information display