Level Too Low

Level too low

Checking the brake fluid level




- Ignition off.
- Check whether the brake fluid level is too low.
- Check the connector. Check for contact resistance. Check for oxidation. Check for loose connections.
Remedy as necessary.

Continue - Verification

-------------------------------------------------





Information

Fault-tracing information
The fault should have been detected and remedied. As this is not the case fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.

Do you want to exit fault-tracing?

Yes - Exit fault-tracing

No - Attempt New Test

------------------------

Attempt New Test - Checking the brake fluid level

-------------------------------------------------

Verification




- Start the engine.
- The diagnostic trouble codes (DTCs) are erased after the correct data has been obtained.
- Check that no symbol for service brake is indicated in the driver information instrument.

Has the fault been remedied?

Yes - FAULT FOUND

No - Fault-tracing information

-------------------------------------------------