Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information CEM-9F33

Condition
The central electronic module (CEM) checks the brake fluid level.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Low brake fluid level.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition switch position II.
- Battery voltage between 9 - 16 V.

Substitute value
- None.

Possible source
- Low brake fluid level.
- The cause of the malfunction may be that the sensor is loose or not connected correctly.

Fault symptom[s]
- Message in information display