Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information CEM-8F28

Condition




The diagnostic trouble code (DTC) is stored if the central electronic module (CEM) registers an internal fault.
The diagnostic trouble code (DTC) can be diagnosed when the ignition is switched on.

Note! The relay is also found in vehicles that are not equipped with a rear washer motor. If this is the case, there is no fault system, and no corrective action is needed.

Substitute value
- None.

Possible source
- Internal fault in the control module.

Fault symptom[s]
- Rear windshield washing does not work
- The rear windshield washer motor does not operate.