Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information CEM-8D10

Condition
The central electronic module (CEM) checks the signal from the stop lamp switch.
The diagnostic trouble code (DTC) is stored if the central electronic module (CEM) registers that the information from the stop lamp switch does not correspond to the information on the CAN network.
The diagnostic trouble code (DTC) can be diagnosed in key positions I, II with the stop lamp activated.

Substitute value
- None.

Possible source
- Open-circuit in signal cable from the stop lamp switch.

Fault symptom[s]
- None.