Faulty Signal

Faulty signal

Information about symptom fault-tracing
The diagnostic trouble codes (DTCs) are included in a larger fault-tracing for the symptom Starter motor not running.
Add the symptom and fault trace according to Checking the start system.
If this has already been carried out, continue fault tracing.

Do you want to continue with this procedure?

Yes - Information

No - DONE

-------------------------------------------------

Information
The central electronic module (CEM) has tried to check the key in the ignition switch. The key has given an incorrect response.
When checking the key, ensure that only that key is in the proximity of the ignition.
If the key definitely belongs to this car, the key is probably defective. A new key and software must be ordered.
If a new key and software does not help this means that the Start Control Unit (SCU) is faulty and requires replacing.
Remedy as necessary.

Other information
- Programming key Testing and Inspection





Continue - DONE

-------------------------------------------------