Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information CEM-6C43

Condition





Hint: The diagnostic trouble codes (DTCs) are included in a larger fault-tracing for the symptom Starter motor not running.

The central electronic module (CEM) checks the identity of the ignition key when the key is inserted in the ignition switch. The diagnostic trouble code (DTC) is stored if the check indicates that the ignition key identity code is not valid.

Note! If the ignition has been turned to position II with an unidentified key not belonging to the vehicle, diagnostic trouble codes (DTCs) can be incorrectly stored in the brake control module (BCM) and electrical power steering module (EPS).

Substitute value
- None.

Possible source
- The ignition key identity code is not valid.

Fault symptom[s]
- Starter motor does not operate