Signal Missing

Signal missing

Information about symptom fault-tracing
The diagnostic trouble codes (DTCs) are included in a larger fault-tracing for the symptom Starter motor not running.
Add the symptom and fault trace according to Checking the start system.
If this has already been carried out, continue fault tracing.

Do you want to continue with this procedure?

Yes - Information

No - DONE

-------------------------------------------------

Information
Central Electronic Module (CEM) has not contacted the key.
Try with another key belonging to the vehicle.
If it works with another key new software must be ordered for the key that does not work.
If it does not work with another key, the Start Control Unit (SCU) is defective and must be replaced.

Other information
- Programming key Testing and Inspection





Continue - DONE

-------------------------------------------------