Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information CEM-6C33

Condition
Central electronic module (CEM) checks the function of the mass movement sensors (MMS) or movement sensor (IMS) by sending control messages. If the Central electronic module (CEM) cannot communicate with the front mass movement sensor or with the ultrasonic sensor the DTC is stored.

Substitute value
- None.

Possible source
- Internal fault in the rear mass movement sensor (MMS).
- Internal error in Movement sensor (IMS).

Fault symptom[s]
- Does not alarm the sensor
- Message in the display.