Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information CEM-6C05

Condition




The central electronic module (CEM) checks activation of the lock motors in the doors. The control module receives an indication of the status of the lock motors (locked/unlocked).
If the central electronic module (CEM) does not receive an indication that the lock motor in the driver's door could be locked at the first attempt, the central electronic module (CEM) transmits a second lock command. If there is still no indication after this attempt, the diagnostic trouble code (DTC) is stored.

Substitute value
- None.

Possible source
- Defective switch for indication of the lock motor status
- The lock motor is stuck in the unlocked position
- The lock motor has become too hot.

Fault symptom[s]
- Does not lock / unlock a door
- Door locked/unlocked twice in succession