Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information CEM-3F02

Condition




The central electronic module (CEM) checks the signal from the position sensor at the clutch pedal.
The diagnostic trouble code (DTC) is stored if the control module registers a faulty signal.
The diagnostic trouble code (DTC) can be diagnosed with the ignition in positions I or II.

Substitute value
- Cruise control switched off.

Possible source
- Open-circuit in the signal cable
- Incorrectly installed pedal position sensor
- Damaged pedal position sensor.

Fault symptom[s]
- Cruise control does not function at all.