Signal Too High

Signal too high

Replacing a component




- Ignition off
- Try by replacing the comfort relay (2/193) in Central electronic module (CEM). For more information, see wiring diagram and signal description.

Other information
- Connecting the breakout box Connecting the Breakout Box, Central Electronic Module (CEM)
- Location of components Component Location, Central Electronic Module (CEM)
- Checking wiring and terminals Checking Wiring and Terminals

Continue - Verification

-------------------------------------------------

Info

Attempt New Test - Replacing a component

FAULT-TRACING FAILED - No Fault Found

-------------------------------------------------

Verification





Hint: After carrying out the repair check that the fault has been remedied.

- Ignition off.
- Reinstall the connectors, components etc.
- Ignition on.
- Check that the relay works by pressing on the VCT2000 symbol.





Is the function OK?

Yes - FAULT FOUND

No - Info

-------------------------------------------------