Blocked

Blocked

Checking the fan for the passenger compartment temperature sensor




- Ignition on.
Check using a hand that the fan for the passenger compartment temperature sensor is blowing.
Check that the fan rotates freely and is not blocked by any objects.

Other information:
- For further information about the connectors, fuses and relays, see the Wiring Diagram
- Connecting the breakout box Connecting the Breakout Box, Climate Control Module (CCM)
- Signal description Signal Description, Climate Control Module (CCM)
- Component location Component Location, Climate Control Module (CCM)
- Climate control module (CCM) Service and Repair
- Checking wiring and terminals Checking Wiring and Terminals





Continue - Verification

-------------------------------------------------

Verification




Verification

Hint: After carrying out the repair, check that the fault has been remedied.








- Ignition off
- Reinstall the connectors, components etc.
- Ignition on.
Check by feeling with a hand that the fan is blowing.

Is the fan working?

Yes - VERIFIED

No - VERIFICATION FAILED

------------------------

VERIFIED - FAULT FOUND

VERIFICATION FAILED - Fault-tracing information

-------------------------------------------------

Fault-tracing information

Attempt New Test - Checking the fan for the passenger compartment temperature sensor

-------------------------------------------------