Fault-Tracing Information

Fault-tracing

Faulty software
The control module has registered that invalid or incorrect data has been obtained from the vehicle configuration file.
This can be due to a fault in the Central electronic module (CEM).

Downloading new software
Remedy the fault by loading new software into the Central Electronic Module (CEM).
After downloading new software into the central electronic module (CEM), the new software must also be downloaded into the Bluetooth phone module (BPM)

Select "Continue" after programming.

Continue - Verification

-------------------------------------------------

Verification

Hint: After carrying out the repair, check that the fault has been remedied.








- Ignition off.
- Reinstall the connectors, components etc.
- Ignition on.
Check the function of the Bluetooth phone module (BPM).

Is the carphone working?

Yes - FAULT FOUND

No - Information

-------------------------------------------------

Information

Attempt New Test - Faulty software

-------------------------------------------------