Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information BCM-A032

Condition
The diagnostic trouble code (DTC) is stored in the subsequent operating cycle (ignition off and ignition on) if the brake control module (BCM) performs an extended start up check of the DSTC system due to a number of different faults during the previous operating cycle.

Substitute value
- None.

Possible source
- The diagnostic trouble code (DTC) has been stored in the previous operating cycle.

Note! This diagnostic trouble code (DTC) is not due to an internal hardware fault in the Brake control module (BCM) and must not be remedied by replacing the control module.

Fault symptom[s]
- The information lamp is lit.