Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information BCM-0151

Condition




The control modules in the car continually transmit and receive information over the CAN (control area network) data network. When the brake control module (BCM) is supplied with voltage, the CAN controller which handles control area network communication is initialized.
The diagnostic trouble code (DTC) is stored if initialization of the CAN controller fails.
The diagnostic trouble code (DTC) can be diagnosed while the ignition is switched on.

Substitute value
- Traction Control is blocked
- Stability Control is blocked
- Active yaw control is blocked
- All communication to and from the brake control module (BCM) is shut off.

Hint: Brake system, abbreviations Brake System, Abbreviations

Possible source
- Internal fault in the brake control module (BCM).

Fault symptom[s]
- The ABS warning lamp is lit
- The warning lamp for brake circuit not functioning is lit
- General warning lamp lit
- Traction control warning lamp lit
- Traction control does not function
- The stability control system does not function.