Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information BCM-0117

Condition





Note! The diagnostic trouble code (DTC) applies only to cars with dynamic stability and traction control (DSTC).

There are two versions of the body sensor cluster stability sensor (BSC). One is for two wheel drive cars, the other is for four wheel drive cars. The diagnostic trouble code (DTC) is stored if a body sensor cluster stability sensor (BSC) for a car with All-wheel drive (AWD) has been installed in a car with two-wheel drive (2WD).
The diagnostic trouble code (DTC) can be diagnosed when the ignition is switched on.

Substitute value
- Traction Control is blocked
- Stability Control is blocked
- Active yaw control is blocked.

Hint: Brake system, abbreviations Brake System, Abbreviations

Possible source
- The body sensor cluster stability sensor (BSC) for AWD is installed in a car with 2WD.

Note! This diagnostic trouble code (DTC) is not due to an internal hardware fault in the Brake control module (BCM) and must not be remedied by replacing the control module.

Fault symptom[s]
- The information lamp is lit
- Traction control does not function
- The stability control system does not function.