Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information BCM-0116

Condition





Note! The diagnostic trouble code (DTC) applies only to cars with dynamic stability and traction control (DSTC).

The diagnostic trouble code (DTC) is stored if the brake control module (BCM) registers that the communication with the body sensor cluster stability sensor (BSC) is disrupted.
The diagnostic trouble code (DTC) can be diagnosed when the ignition is switched on.

Substitute value
- Traction Control is blocked
- Stability Control is blocked
- Active yaw control is blocked.

Hint: Brake system, abbreviations Brake System, Abbreviations

Possible source
- There is a short-circuit between the wiring for the CAN communication between the brake control module (BCM) and the body sensor cluster stability sensor (BSC)
- Short-circuited to ground or to supply voltage in the wiring for controller area network (CAN) communication between the brake control module (BCM) and the body sensor cluster stability sensor (BSC)
- Internal fault in the body sensor cluster stability sensor (BSC)
- Internal fault in the brake control module (BCM).

Fault symptom[s]
- The information lamp is lit
- Traction control does not function
- The stability control system does not function.