Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information BCM-0058

Condition




The diagnostic trouble code (DTC) is stored if the brake control module (BCM) registers that the supply voltage is above 18 V.
The diagnostic trouble code (DTC) can be diagnosed when the ignition is switched on.

Substitute value
- ABS is blocked
- Electronic Brake force Distribution is blocked
- Traction Control is blocked
- Stability Control is blocked
- Active yaw control is blocked.

Hint: Brake system, abbreviations Brake System, Abbreviations

Possible source
- Fault in the charging system.

Fault symptom[s]
- General warning lamp lit
- The ABS warning lamp is lit
- The warning lamp for brake circuit not functioning is lit
- The ABS system does not function
- Traction control does not function
- The stability control system does not function.