Fault-Tracing Information

Fault-tracing

Fault-tracing
The control module has registered an internal fault.
- Load new software into the control module.






Continue - Verification

-------------------------------------------------

Verification





Verification
Read out the control module's id-number by clicking on the symbol for VCT2000.





Could the control module ID be read off?

Yes - FAULT FOUND

No - FAULT-TRACING FAILED

------------------------

FAULT-TRACING FAILED - Fault-tracing

-------------------------------------------------

Fault-tracing
Remedy in the following order.
1. Replace the control module's MOST-cables and the cables for the USB-port.
2. Load new software into the control module.

Other information:
- Universal Serial Bus (USB) Module Universal Serial Bus (USB) Module


Continue - Verification

-------------------------------------------------

Verification
Verification
FAULT-TRACING FAILED - Fault-tracing

-------------------------------------------------

Fault-tracing
The control module probably has an internal fault.
- Replace control module.

Other information:
- Universal Serial Bus (USB) Module Universal Serial Bus (USB) Module






Continue - Verification

-------------------------------------------------

Verification
Verification
-------------------------------------------------