Cargo Compartment Cover

Cargo compartment cover





INTRODUCTION
- NOTE! Read through the whole installation instruction before starting the work.
- The front page gives the date of this edition and the edition it replaces
- The second page shows the tools needed for the installation and the contents of the installation kit
- The illustrations display the procedure in order of operation. The order of operation is repeated in the text section
- Cut out the text page in order to follow the illustrations and text at the same time.






Cargo compartment cover






Applies to cars with three rows of seats
- Fold down the third row of seats.

Applies to all models
- Fold the rear backrests forwards
- Open out the dirt cover in the cargo compartment so that the three loose flaps are on the reverse of the backrests.





- Fold up one of the outer backrests slightly. Thread the strap on the flap over the head restraint.









- Feed into the side panel by inserting the stiff edges of the dirt cover into the joint between the plastic and textile sections.

- Repeat the previous procedure for the remaining backrests and side panel.





- Fold up the backrests. At the same time insert the dirt cover in the space between the backrest and the cargo compartment floor.