Checking USB Port For Software Downloading

Checking USB port for software downloading

Reading off diagnostic trouble codes (DTCs)
In the event of problems with the USB port for software download, a check procedure can be run to establish the causes of the fault.
- Insert the USB test device (Software Download Media Device) into the USB port for software download.
- Click on the VCT2000 symbol.
- Read out the diagnostic trouble codes in the vehicle
- Check to see if DTC ICM-B125209 is stored.
- Fault-trace according to diagnostic trouble code (DTC) instructions.

Other information
Diagnostic trouble code (DTC) information ICM-B125209 Diagnostic Trouble Code (DTC) Information









Has the fault been remedied?

Yes - FAULT FOUND

No - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
The fault should have been detected and remedied. As this is not the case fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.

Do you want to exit fault-tracing?

Yes - Exit Fault-tracing

No - Attempt New Test

------------------------

Attempt New Test - Reading off diagnostic trouble codes (DTCs)

-------------------------------------------------