Checking Noise From Optional Equipment.

Checking noise from optional equipment.

Reading off diagnostic trouble codes (DTCs)
Check that any optional equipment is connected to input AUX 2 on the Integrated Audio Module (IAM).
For example:
- Option Blue tooth system.
- Optional rear seat entertainment.
Click the VCT2000 symbol to begin.

Note! The check procedure may only be run if something is connected to input AUX 2 on the Integrated Audio Module (IAM).

Read out the diagnostic trouble codes in the vehicle
Check if any of the DTCs, IAM-B12A011, IAM-B12A012 or IAM-B12A013, are stored.
Fault-trace according to diagnostic trouble code (DTC) instructions.

Other information
- Diagnostic trouble code (DTC) information IAM-B12A011 Diagnostic Trouble Code (DTC) Information
- Diagnostic trouble code (DTC) information IAM-B12A012 Diagnostic Trouble Code (DTC) Information
- Diagnostic trouble code (DTC) information IAM-B12A013 Diagnostic Trouble Code (DTC) Information









Has the fault been remedied?

Yes - FAULT FOUND

No - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
The fault should have been detected and remedied. As this is not the case fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.

Do you want to exit fault-tracing?

Yes - Exit Fault-tracing

No - Attempt New Test

------------------------

Attempt New Test - Reading off diagnostic trouble codes (DTCs)

-------------------------------------------------