Fault-Tracing Information

Fault-tracing

Information




- Ignition on.
The diagnostic trouble code indicates that a control module from another vehicle has been installed. Load new software into the control module.

Continue - Checking the diagnostic trouble codes (DTCs)

-------------------------------------------------

Checking the diagnostic trouble codes (DTCs)




- Ignition off.
- Wait 1 minute.
- Ignition on.
- Wait 1 minute.
- Read off diagnostic trouble codes (DTCs).
The control module automatically erases DTCs when its vehicle configuration corresponds with the one in the Central electronic module (CEM). Check whether the DTC still exists.

Are the diagnostic trouble code (DTCs) still stored?

Yes - No Fault Found

No - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
The fault should have been detected and remedied. As this is not the case fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.

Do you want to exit fault-tracing?

Yes - Exit Fault-tracing

No - Attempt New Test

------------------------

Attempt New Test - Information

-------------------------------------------------