Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information SRS-U023500

Condition
The control module is continually supplied with necessary information from the Closing velocity module (CVM) via CAN communication on sensor-CAN. The control module checks communication with the Closing velocity module (CVM).
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Communication on sensor-CAN with Closing velocity module (CVM) missing.
- Incorrect value runs longer than 2.5 seconds.
The control module's test for the diagnostic trouble code (DTC) starts when:
- Ignition position II and III.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.

Substitute value
- None.

Possible source
- Fault-trace in transmitting control module.

Fault symptom[s]
- Text window and warning symbol/Red symbol and text message
- Warning lights and chimes/Supplemental Restraint System (SRS) indication/no indication