Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information FSM-U002888

Condition
The control module is continuously supplied with necessary information from the Supplemental restraint system module (SRS) via communication on the sensor-CAN. The control module checks the communication with Supplemental restraint system module (SRS).
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Incorrect message sent/received on the sensor-CAN network.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition switch position II.
- Control module supplied with power.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- Open-circuit on one or both CAN cables on sensor CAN.

Fault symptom[s]
- Cruise control/Does not engage
- Warning lights and chimes/Front monitoring/Active safety indication/no indication
- Text window and warning symbol/Text message