Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information CCM-B10E011

Condition
The remote control uses infrared signals (IR) to transmit commands to the system.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Power supply missing
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Activated control module.

Substitute value
- None.

Possible source
- Short-circuit to ground.

Fault symptom[s]
- Audio other/Keypad on center console does not work
- Remote control/Does not work